IEC 60601-1 ME Equipment Rough Handling Tester AC 220V 50/60HZ

ME Equipment Rough Handling Tester

Comply with IEC60601-1,GB9706.1-2020 standard 9.4.2.4.2, 9.4.2.4.3, 15.3.5 chapter requirements

Technical parameters:
1. Power supply: AC 220V 50/60HZ
2, driving mode: servo motor, horizontal drive, automatic simulation of human hands to push ME equipment to cross the threshold of motion and rough handling test.
3, Speed: 0.8m/s± 0.1m /s (speed 0-2m/s can be set)
4, pushing force range: 0-2000N, accuracy: ± 1%
5, count: 0~9999 times can be preset
6. Push the medical equipment ME to the designated position, tighten the telescopic push and pull arm to the appropriate position on the equipment, and then start the detection mechanism to test the automatic operation and display the push and pull force.
7. Movement over a threshold (IEC 60601-1 Section 9.4.2.4.3)
Size :10X85X1200mm
8. Ascending step shock(IEC 60601-1 Section 15.3.5)
Size: 40* 1500*1200mm
9. Descending step shock (IEC 60601-1 Section 15.3.5)
Size: 40* 1000*1200mm
10. Door frame shock. (IEC 60601-1 Section 15.3.5)
Size: 40*40*1500mm.
11. Control system: 7 inch touch screen +PLC controller
13. The platform test part has dense screw holes for M8 fixed obstacles. Barriers are replaceable.
14, menu prompt Settings, automatic test.
15, equipment size :3500*2000*1800mm(length, width and height), can be designed according to the laboratory site
16. There are protective guardrail around the equipment to prevent injury to the operator

IEC 60601-1 Equipment Rough Handling Tester

ME Equipment Rough Handling Tester

IEC 60601-1 ME Equipment Rough Handling Tester AC 220V 50/60HZ Images